名称描述内容
您好,欢迎访问杭州度外认证技术服务有限公司官方网站!
认证君
联系我们
24小时服务热线

度外认证

专业服务成就客户价值

139-5811-1261

关于我们
您当前的位置:
置顶信息
CSA认证流程 范围 方式 步骤Certification process scope, mode and steps
来源: | 作者:度外认证 | 发布时间: 2021-04-02 | 2717 次浏览 | 分享到:

 CSA认证流程
  1、将初步申请表填妥,连同一切有关产品(包括全部电器部件和塑胶材料)的说明书和技术数据一并交给CSA International 
  2CSA International 将根据产品的具体情况确定认证费用,再以传真通知申请公司。 
  3、经申请公司确认后,将寄上正式申请表和通知书,该通知书包括下列要求: 
  (1)正式申请表签署后,电汇认证费用(可以人民币支付)到办事处。 
  (2)按通知将测试样板送到指定地点。 
  4、指定实验室将依时进行认证工作。 
  5、认证测试完毕之后,将会发给申请公司一份初步报告书(Findings Letter),详细列明如下: 
  (1)产品结构需如何改良才能符合标准。 
  (2)要用来完成认证报告的其他资料。 
  (3)请申请公司检阅认证记录(Certification Record)草案的内容 
  (4CSA认证所需的唛头以及获取唛头的方法。 
  (5)产品所需的工厂测试(Factory Tests)。 
  6CSA International 将申请公司对上述第五项的回答加以评估。 
  7、同时 CSA International将会编写一份用作产品生产参考和跟踪检验用的认证报告(Certification Report)。 
  8、到了这个阶段,在某种情况下,CSA International要到工厂作工厂初期评估(Initial Factory Evaluation),简称IFE 
  9、最后 CSA International 便会连同认证记录(Certification Record)发一份合格证书(Certification of Compliance)授权申请公司在其产品上加上CSA的认证标志。 
  10、申请公司要和CSA International签订一份服务协议(Service Agreement),以表示双方同意CSA International到工厂作产品跟踪检验。申请公司每年需支付年费(Annual Fee)来维持该项协议。 
 CSA认证的产品范围
  CSA的认证检验主要集中在八个方面: 
人类生存及环境
  包括职业保健和安全、公共安全、体育运动及娱乐设备环保及保健工艺技术。 
电气与电子
  包括建筑用电气设备安装法规,各类工商及民用的电气、电子产品。 
通讯与信息
  包括住处处理系统、电信及电磁干扰技术与设备。 
建筑结构
  包括建筑材料和产品,土木产品,混凝土、砖石结构,管件及建筑设计。 
能源
  包括能源再生和转移,燃料燃烧及安全设备,核能技术。 
运输及分配系统
  包括机动车安全、油气管线、物资处理与分配及离岸设施。 
材料工艺技术
  包括焊接与冶金。 
商业及生产管理系统
  包括质量管理与基础工程。 
 CSA认证的方式与方法
  CSA认证工作程序的灵活性很大,根据不同产品,其方法步骤也不一样。 
  1、根据规格型号。如每个规格都做认证,既花钱又费时,所以对同一用途,各种不同规格的产品,可选一两种有代表性的做认证。如1-100千瓦的电机,就可这样做。 
  2、根据用户的特殊要求,对某种产品做认证。如:工业开关,根据用户意见,制造厂商生产的产品与原设计的产品有差别,可按用户要求做认证。 
  3、对大型设备的认证。如大型设备是分几个企业生产的,可以组装在一起,在组装地点进行认证。 
  4、根据人的脑力、体力进行实地试验。如儿童无法打开的药品包装盖。 
  CSA通常采用的认证方法分四个步骤: 
  1 认证前分析。申请者提出申请后,要分析申请人所提供的有关产品的资料是否完备,样品是否符合规定。 
  2 测试前分析。认证工作师确定测试项目,拟出测试程序。 
  3 根据程序及项目进行测试。 
  4 实验室测试后分析。认证工程师将测试结果分析后,与申请人见面。如测试结果与要求相符,认证工作即告一段落,可发给申请人认证合格证。 

 

CSA certification process

1. Complete the preliminary application form and submit to CSA international all instructions and technical data on all related products (including all electrical parts and plastic materials).  

2. CSA international will determine the certification fee according to the specific conditions of the product, and then fax the application company.  

3. Upon confirmation by the applicant company, a formal application form and notice will be sent, which includes the following requirements:

(1) After the formal application form is signed, the telegraphic transfer certification fee (which can be paid in RMB) will be sent to the office.  

(2) Press the notification to send the test template to the specified location.  

4. The designated laboratory will be certified on time.  

5. After the certification test is completed, a preliminary report will be sent to the applicant company, which is detailed as follows:

(1) How to improve the product structure to meet the standards.  

(2) Other information to be used to complete the certification report.  

(3) Please apply for the content of the draft certification record

(4) The shipping mark required for CSA certification and the method of obtaining the mark.  

(5) Factory tests required for the product.  

6. CSA international will evaluate the company's response to the fifth item above.  

7. Meanwhile, CSA international will prepare a certification report for reference and tracking inspection of product production.  

8. At this stage, in some cases, CSA international will go to the factory for initial factory evaluation, or ife.  

9. Finally, CSA international will issue a certificate of compliance with the certification record to authorize the applicant company to add the CSA certification mark to its products.  

10. The applicant company shall sign a service agreement with CSA international to indicate that both parties agree that CSA international will go to the factory for product tracking inspection. The applicant company will pay annual fee every year to maintain the agreement.  

CSA certified product range

The certification inspection of CSA mainly focuses on eight aspects:

Human existence and environment

It includes occupational health and safety, public safety, sports and entertainment equipment environmental protection and health care technology.  

Electrical and electronic

Including the installation regulations of electrical equipment for construction, various kinds of industrial and commercial and civil electrical and electronic products.  

Communication and information

Including residential processing system, telecommunication and electromagnetic interference technology and equipment.  

building structure

Including building materials and products, civil products, concrete, masonry structure, pipe fittings and architectural design.  

energy

Including energy regeneration and transfer, fuel combustion and safety equipment, nuclear technology.  

Transportation and distribution system

It includes vehicle safety, oil and gas pipelines, material handling and distribution and offshore facilities.  

Material technology

Including welding and metallurgy.  

Business and production management system

Including quality management and basic engineering.  

The way and method of CSA certification

CSA certification work procedures are flexible, and the methods and procedures are different according to different products.  

1. According to the specification and model. If each specification is certified, it is both expensive and time consuming, so for the same purpose, various products of different specifications, one or two representative products can be used for certification. If you have a 1-100 kW motor, you can do this.  

2. According to the special requirements of users, the certification of a product is made. For example: industrial switch, according to the user's opinion, the products produced by the manufacturer are different from the original design products, and can be certified according to the user requirements.  

3. Certification of large equipment. If large equipment is produced by several enterprises, it can be assembled together and certified at the assembly site.  

4. According to the human brain, physical strength to carry out field test. If children cannot open the drug packaging cover.  

The certification method commonly used by CSA is divided into four steps:

1. Pre certification analysis. After the applicant applies, it is necessary to analyze whether the information of the relevant products provided by the applicant is complete and whether the samples meet the requirements.  

2. Pre test analysis. The certified worker determines the test items and proposes the test procedure.  

3. Test according to procedure and project.  

4. Post test analysis. The certified engineer will meet the applicant after analyzing the test results. If the test results are in accordance with the requirements, the certification work will be completed and the applicant's certificate of conformity can be issued.

最新信息
其他信息